Design CUF MILANO LAB – L. GLORINI
A reception desk programme that offers a large number of configurations.
The single counters are available in 4 types and with worktops in two different depths of 60 or 80 cm. Composite counters, using worktops with depth of 60cm, are available in 21 different types.
Two adjoining elements are made integral with each other not only by through metal pivots placed in the vertical panels, but also by a shared metal leg placed under the countertop. The right and left end elements come in 4 different types. The central elements are available in 2 different types, while a single corner element can be used either right or left. The 90 cm deep consultation table top, on the other hand, is available in 3 different types: right, left or central. The range is completed by side extensions, which are also available in two different types: one with vertical panels, like the other system components, and the other with metal legs. The two different types have been designed so that these elements can be used to complete the perimeter system, or shared between several adjacent stations. Extensions with metal legs can be assembled to a work surface indifferently in the right or left position, but also in the middle of two contiguous work surfaces. For extensions with perimeter panels, the right and left elements are provided. For each of the counter types there are 3 different worktop lengths (160, 140 and 120 cm), while for the extension counters and side extensions there are worktops with lengths of 120, 100 and 80 cm; an exception is the consultation worktop available in a single length of 100 cm. All elements of the series, whether vertical panels or horizontal elements, are made of 30 mm thick melamine chipboard edged with 2 mm Abs edge. Edges and corners are radiused 2 mm. The vertical panels, as well as the reception fronts and shelves, have a 45-degree section, appropriately designed to avoid sharp edges.
Standard finishes Moon White, Light Grey and Doria Oak with the possibility of obtaining configurations in which the worktop, shelf and reception front and structural parts have different colours. Canapa and Peltro finishes are available upon request and order. All metal parts are epoxy powder-coated without heavy metals and are available in the standard colours Anthracite, White, Sun Yellow and light blue with a smooth matt surface finish for all four colours.
